Analysis and control of micro-stepping characteristics of ultrasonic motor

Frontiers of Mechanical Engineering - Micro-stepping motion of ultrasonic motors satisfies biomedical applications, such as cell operation and nuclear magnetic resonance, which require a precise...     

Nature of heterophase inclusions in high-purity optical fiber materials as studied with 3D laser ultramicroscopy

3D laser ultramicroscopy (3D LUM) is intended specially for determining the concentration and size distribution of submicron inclusions in the bulk samples of high-purity materials for visible and IR fiber optics. In this work the 3D LUM technique is shown to be able to identify the nature of individual inclusions detected. The measurement of the light scattered by an inclusion at a varied probe beam wavelength and polarization and at a varied scattered light collection angle makes it possible to determine the inclusion refractive index. The 3D LUM possibilities are illustrated by the example of studying the inclusion nature in the As₂S₃ glass samples prepared by the direct synthesis from elements in a quartz container at elevated temperatures.     

Generalization of the thermal model of infrared radiation sensors

In many theories and applications, generalized models can give a good head start for further research where the implementation of new elements and/or boundary conditions could become quite complex. In this paper the development of a compact thermal model of an infrared sensor will be presented. This thermal model includes not only the thermal resistances and capacitances of the sensor structure itself but the radiative and convective thermal resistances to the ambience and between the sensor plate and the heat source (thermal transfer impedance) which is important when the heat source and the sensor are in close proximity. Limitations and the applicability of the proposed model are also discussed. We also aim to present how the proposed model can be used for other IR sensor structures as well.     

Finite-point method for efficient timing characterization of sequential elements

Timing characterization of sequential elements, such as latches and flip-flops, is one of the critical steps for timing closure in the pipelined design. Traditional characterization of setup and hold time constraints is computationally intensive, due to the demand on high accuracy in monitoring the operation failure. To improve the efficiency, this work proposes a finite-point based method for the characterization of setup and hold time constraints. The finite-point method identifies several critical data points in the non-linear curve of timing characteristics, and abstracts the essential setup/hold information from them. Moreover, compact models are derived for each point, further reducing the computation cost. The proposed method is general for all sequential elements in the standard cell library. It is comprehensively validated using benchmark circuits at 45 nm node. Experimental results demonstrate approximately 25× reduction in characterization time, with the prediction error in setup and hold time within 9% of FO₄ nominal delay, as compared to that of SPICE simulation results.     

Crystal violet dye sorption and transport in/through biobased PVA cryogel membranes

Cryogels based on poly(vinyl alcohol) [PVA] and three types of bioinsertions such as scleroglucan, cellulose microfibers, and zein, respectively, have been prepared using capacity of PVA to crosslink by repeated freezing–thawing cycles. The effect of the incorporation of biopolymers on the properties of PVA cryogel has been studied by using several techniques such as: scanning electron microscopy, differential scanning calorimetry, and Fourier transform infrared studies. The obtained biobased cryogel membranes were subjected to sorption and to diffusion experiments using Crystal Violet (CV), a dye commonly used in the textile industry and in medicine. Image analysis with CIELAB system was used both to monitor the cryogels loading with CV and to gain insight in the dye state into the gel, in correlation with the bioinsertion type and gels morphology. Dye diffusion but also sorption capacity of the cryogels was found to be closely related to the type of biopolymer. In this article the equilibrium (sorption isotherms) and transport properties (diffusion and permeability coefficients) of CV, in/through physical cross‐linked PVA hydrogel membranes with bioinsertions has been reported. The highest efficiency for the CV removal from aqueous solutions was obtained for the PVA/Scl cryogels. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41838.     

Evaluation of the intergranular corrosion in austenitic stainless steel using collinear wave mixing method

Failures due to intergranular corrosion in components of austenitic stainless steel have always been a tough problem in engineering practice. In this paper, the collinear wave mixing was investigated to evaluate the intergranular corrosion in austenitic stainless steel. An acoustic nonlinearity parameter related to the bispectrum, the propagation distance and the amplitudes of fundamental waves in measured signal is proposed. Nonlinear acoustic measurements were conducted on four tubes with different degree of intergranular corrosion. The experimental results demonstrated that the proposed acoustic nonlinearity parameter is sensitive to intergranular corrosion in samples, and is well correlated with the degree of damage.     

Combining Acoustic Emission and Vibration Technologies Harbors Huge Potential for Material Characterization

The demand for raw materials is growing worldwide, in step with increasing world population and rising living standards of emerging countries. It is becoming more difficult to exploit primary raw materials because of declining ore grades and increasingly complicated mineralogies. Thus, the efficient and environmentally sustainable exploitation of primary resources using innovative technologies has emerged as an important research field to address these issues. An innovative approach is introduced to optimize process and quality control by combining acoustic emission (AE) and vibration technology. The general feasibility of these two technologies for material recognition and characterization is examined. The new approach was tested to determine whether coal could be distinguished from waste rock.     

换能器结构参数对聚合物超声塑化黏弹生热的影响

为研究超声换能器结构参数对聚合物超声塑化过程黏弹性生热的影响，首先确定超声黏弹性生热系统的组成，进行纵振超声换能器结构设计；然后分析超声黏弹性生热过程及超声黏弹性生热原理；最后采用单一变量法分析超声换能器的主要结构参数对其纵振频率及工具头前端质点最大振幅的影响，将其实际输出的纵振激励加载于熔融聚合物，研究其结构参数对聚合物超声黏弹性生热过程及达到聚合物玻璃化转变温度所用时间的影响。结果表明，随纵振激励作用时间的增加，聚合物温度非线性升高；放大比对聚合物温度变化影响最大，前盖板厚度和工具头长度次之，影响最小的是变幅杆长度。     

核电站放射性污染液压扭力扳手的去污实践

核电站在日常生产及大修过程中,放射性污染设备和场地的检修作业会产生一定量的污染检修工具,其中包含价值高、体积大、去污难度大的液压扭力扳手。因液压扭力扳手结构复杂、主子部件较多、且热点多淤积在死角位置,导致其放射性去污难度较大,国内核电站多作放射性固体废物处理为主。液压扭力扳手作为高价值专用工具,大量放射性污染检修工具报废给核电站成本管控、放射性废物最小化管理和电站辐射防护最优化带来了较大的压力。针对此问题, 电站开展了多项放射性污染液压扭力扳手深度去污试验,采用化学去污、机械去污、泡沫去污、超声波去污等多种组合工艺,经过四个阶段的深度去污试验,最终将多台放射性污染液压扭力扳手全部去污合格,并全部实现现场复用。此次深度去污试验研究总结的“放射性污染液压扭力扳手深度去污方法”,去污因子超过10³,去污试验各项指标效果良好,方法可行、有效、实用,可为业内同行提供参考。